Bushes & Mounts
Polyurethene is now widely used as a direct replacement for the standard factory fitted rubber bushes and suspension joints.The benifits of polyurethene is it's durability, resistance to wear and insulating properties without adding undue harshness to ride quality or noise. When these are used together it helps prevent geometry changes during acceleration and braking.
-Note Superflex bushes are in the hardness range of 60- 80 shore (hard)
-Note Superflex bushes are in the hardness range of 60- 80 shore (hard)
-
Front Subframe Alloy Tower Mounts
ABR013/1
-
Superflex Bottom Arm Bush 1 Piece 80 degree hardness
Superflex Lower/Bottom Arm Bush 1 Piece with Stainless Steel Sleeve.Car set. Easy fit Stabilises suspension under heavy braking and acceleration. 80 degree hardness ( normal bushes are approx 30 degree )Superflex Bottom Arm Bush 1 Piece 80 degree hardness
PFAB-101
Powerflex. THE Ultimate Bottom Arm Poly Bush, Drasically reduce all laterall movement on the bottom arm unlike the 2 piece bushes, You only need fit them once so fit the best
-
Powerflex Engine Steady Bush kit
Superflex1 Piece engine steady bush kit Fits the standard upper Engine Tie Rod Including our Left hand drive Engine steady as an Upgrade.Powerflex Engine Steady Bush kit
EPF213
These are THE ultimate in heavy duty engine steady bushes, a one piece poly bush that can easily be pressed into the tie rod with a vice. Direct replacement for the original rubber split ones.
-
Superflex Suspension Classic Mini Tie Rod Bushes
Superflex Suspension Classic Mini Tie Rod Bushes. Fit the Best Direct Replacement 60 degree hardness ( Standard Bushes are 40 degree hardness ) Set of 4. -
Competition Front Subframe Mounting Kit
Complete Kit Competition Front Subframe Mounting Kit.Competition Front Subframe Mounting Kit
AVR013
Kit contains: 4 alloy subframe tower bolt spacers and 2 hi-tech super strong fabricated rear subframe to body mounts.(our Lower Front Subframe mounts must not be confused with poor quality brackets sold by others). -
Front Subframe To Body Mounts
ABR013/2
These are the ultimate floor mounts. Not to be compared with lesser quality copies. -
Powerflex Rear Subframe Poly Bush Kit, Early to 83
Powerflex Rear Subframe Poly Bush Kit, Early to 83 60 degree hardness -
Powerflex Rear Subframe Poly Bush Kit, Late 83 on
Powerflex Rear Subframe Poly Bush Kit, Late 83 on 60 degree hardness Fit and forget. -
Tear Drop Replacement Mountings Solid Alloy
ABR247
These mounts are located at the front of the front subframe. The original rubber mounts are prone to braking. Solid mounts are a good idea on a fast road vehicle.
